APFC Panel

Approx. Rs 6,000 / NumberGet Latest Price

• Operating Voltage: 110 V AC* / 230 V AC ±10%; 50 / 60 Hz
• Operating Current: 100 mA - 5,5 A
• Capacitor Steps: 12
• Network Type: Single-phase 1 CT
• Accuracy: 1% ±1 digit (V, I, cosj); 2% ±1 digit (W, VAr, VA)
• CT Ratio: 5…10000 / 5A
• PF Setting: 0.8 to 1 (inductive)
• Time Delay between Steps: 2-1.800 sec. (for switch on / off separately)

Approx. Rs 9,000 / NumberGet Latest Price

• Easy to handle
• Independent of frequency
• Easy maintenance

• Feeder KVAR entry through Keyboard
• Fine tuning possible ( independent of ratio's)
• Absolute value of KVAR
• User entered parameter is stored in non-volatile memory (EEprom)
• CT Ratio System Voltage user selectable through key board display
• Independent of Frequency
• Most Optimum combination obtained through advanced control programming
• RISC architecture dedicated Microcontroller based
• Target pf 0.80lag to 0.90 lead selectable through key board display
• Auto/Manual mode
• No complicated setting procedure
• User friendly interface
• Single line 16 character back-lit LCD display for P.F entering parameters and
• LED indication for capacitor bank status
• Software set dead band for hunt-free operation
• Display indication for PT failure
• Display of reversal of polarity of CT
• Under current indication

• Current: CT secondary, 5 Amps, CT can be mounted on any phase of the main incomer (1 Amp model is available on request)
• Voltage: Built in PT, can be connected between remaining two phases
• Aux. Supply: 85-275V AC/DC
• Indication: 16 Character back-lit LCD Display
• CT Burden: 0.25 VA
• Capacitor stage: 4,6,8,10 12 stages
• Switching time: 60 Seconds
• Dimensions:144x144x120 mm (HxWxD)
• Panel Cut-out: 137x137 mm

Applications:

• Industrial application where inductive load which are critical like inching load furnaces, i.e. Dynamic loads
• Application wherever energy conservation is vital

Additional Information:

• Production Capacity: 100 Nos per month
• Delivery Time: Immediate
• Packaging Details: 2 Ply corrugated Recycled Box

Approx. Rs 7,920 / PieceGet Latest Price

Product Description:

We are engaged in offering a gamut ofAutomatic Power Factor Correction Relayor APFC Relay-SS P 2108-P 2115 to the clients. Our range is developed in line with the international quality standards. Moreover, we have developed this range as per the dynamic requirements of our esteemed clients. These products are extensively used for electrical applications and have intelligent switching and auto CT polarity. The APFC Relay-SS P 2108 P 2115 is provided by us in proper packaging that help us ensure safe transit of these products worldwide.

Features:

• Low energy consumption
• Durability
• Operational efficiency

Approx. Rs 6,000 / PieceGet Latest Price

We are engaged in offering Single Phase APFC Controller to our clients. Our range of all products is widely appreciated by our clients.

Approx. Rs 6,000 / PieceGet Latest Price

While designing the Techno APFC Relays, we have kept in mind these provide longer life and smoothen the functioning of the capacitors and switchgears. Our offered APFC Relays is available with manual, semi automatic and automatic operation ability, measurement sensibility, 4/2 quadrant operation, automatic identification of current flow direction and such many more features. These are manufactured at the industry set parameters and are checked for quality to provider user with a safe and economic usability.

Features:

• LED display
• Digital microprocessor based
• Warning alarms available

Approx. Rs 6 Lakh / PieceGet Latest Price

Additional Information:

• Item Code: 500kvar
• Pay Mode Terms: L/C (Letter of Credit)
• Port of Dispatch: chennai
• Production Capacity: 20
• Delivery Time: one month
• Packaging Details: by wooden box

Approx. Rs 1.65 Lakh / PieceGet Latest Price

Additional Information:

• Pay Mode Terms: L/C (Letter of Credit)
• Delivery Time: One Week

Approx. Rs 59,400 / PieceGet Latest Price

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)

Approx. Rs 5,000 / UnitGet Latest Price

• Sturdy construction
• Resistance against corrosion
• User friendly interface

• Power Factor Controllers are designed to operate manually by using MCB''s as well
• Use a specially designed electronic control circuit that improves power factor to meet requirements of load switching pattern
• Improvement of power factor up to optimum levels is guaranteed
• Product range: 20 KVAr to 1000 KVAr
• We provide solutions for improving plant power factor by installing our APFC panel

• Range: 20 KVAr to 1000 KVAr
• Frequency: 50 / 60 Hz
• Temperature(°C): -40 ~ +45
• Voltage: 3 kV~10 kV

Approx. Rs 48,000 / UnitGet Latest Price

Approx. Rs 30,000 / UnitGet Latest Price

Product Description:

APFC Panels come real handy in the achievement of this purpose. Use of these control panels becomes indispensable in those industries where electrical installations are meant to supply to large electrical load. A dip in Power Factor can attract operational losses and a penalty from electricity board, responsible for electricity supply.

Approx. Rs 2.97 Lakh / PieceGet Latest Price

Approx. Rs 9,450 / PieceGet Latest Price

We excel in offering a wide range of Power Factor Control Relays. Manufactured using unmatched quality components, these products ensure longer service life and dimensional accuracy. Our devices are technically advance and ensure high functional efficiency. owing to its unmatched quality and robustness, these products are extensively recommended by various numbers of clients.

Features:

• Corrosion resistance
• Reliability
• Strong rigid construction

Additional Information:

• Delivery Time: 3 days

Approx. Rs 2.8 Lakh / PieceGet Latest Price

We bring forth to our valued client's high-performance Automatic Power Factor Panel, which is made from high-quality materials. These are developed under the strict care of professionals to ensure minimum losses and wastage of energy. These are fitted with various capacitors to ensure energy saving. Our clients can access them at the industry leading prices.

Approx. Rs 45,000 / PieceGet Latest Price

General Features 

• Intelligent KVAR based switching
• Friendly user interface
• Easy to install
• Large alpha-numeric display
• Available in 12 stages
• Control Features 
• Password protection for settings
• Site settable C.T. Primary from 5 to 7500 A Target PF
• Switching delay
• Lockout time for power ON

Approx. Rs 2.5 Lakh / PieceGet Latest Price

Specifications:- 

• Voltage:- 440 Volt
• Frequency:- 40-50 HZ
• Current:- 1-2000 AMP
• Resistor Value:-  1-2000 Ohm
• Metal: - Iron 

• Air ventilation for Capacitor banks
• Auto Manual facility
• Designed to control smallest capacitor upto 5 KVAR
• Greater work efficiency
• Reasonable prices

Approx. Rs 1.25 Lakh / PieceGet Latest Price

Product Description:

Features:

• Electrical power monitoring and controlling
• Fully automated operations
• Steady performance

Prices may vary depend upon order quantity and capacity of the product.

Approx. Rs 1.5 Lakh / PieceGet Latest Price

• Abrasion resistant
• Corrosion resistant
• Easy to install

Additional Information:

• Production Capacity: Against Order 2 Weeks
• Packaging Details: Recycled and Semi Virgin Heavy Duty Corrugated Sheet

Approx. Rs 1 Lakh / PieceGet Latest Price

We are engaged in offering 50 Kva Techno APFC panel to our clients. Our range of all products is widely appreciated by our clients.

Approx. Rs 5 Lakh / UnitGet Latest Price

Approx. Rs 1.25 Lakh / UnitGet Latest Price

Product Description:

APFC provides compensation for reactive power based on the variations in load conditions to maintain the target power factor. In APFC switching the capacitor is significant as it helps to retain the power factor, the switching is controlled by a Power Factor Controller device that uses the CT feedback to determine the kvar required at any instant. The Power Factor Controller also provides information on the network characteristics such as Active, reactive power, Voltage, power factor for the user to understand. The system generally comprises of Power Capacitors, Controller, firing circuits. The switching system for this depends on the type of compensation

The equipment can be installed

• On the bus-bars of a main distribution switchboard
• On the terminals of a heavily loaded feeder cable

Specifications:

Approx. Rs 80,000 / UnitGet Latest Price

Approx. Rs 1 Lakh / UnitGet Latest Price

Approx. Rs 6,000 / PieceGet Latest Price

Product Description:

Product Price :Get Latest Price

Product Description:

• Power Factor Definition: Power factor is the ratio between the KW and the KVA drawn by an electrical load where the KW is the actual load power and the KVA is the apparent load power. It is a measure of how effectively the current is being converted into useful work output and more particularly is a good indicator of the effect of the load current on the efficiency of the supply system.
• All current flow causes losses both in the supply and distribution system. A load with a power factor of 1.0 results in the most efficient loading of the supply. A load with a power factor of, say, 0.8, results in much higher losses in the supply system and a higher bill for the consumer. A comparatively small improvement in power factor can bring about a significant reduction in losses since losses are proportional to the square of the current.

Additional Information:

• Production Capacity: 3 Nos per Month
• Delivery Time: 2-3 weeks
• Packaging Details: Kraft Paper - Plain Corrugated Cardboard Sheet with corner to corner & top Plywood 6 mm

Approx. Rs 8,000 / PieceGet Latest Price

Approx. Rs 8,500 / PieceGet Latest Price

Approx. Rs 9,000 / PieceGet Latest Price

Approx. Rs 30,000 / PieceGet Latest Price

We are instrumental in providing an excellent range of Automatic Power Factor Control Panel, which is developed using quality approved raw materials. Checked on well-defined attributes, these are widely acknowledged for their operational efficiency, trouble-free operation and longer serviceability.

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)

Approx. Rs 2.5 Lakh / UnitGet Latest Price

Product Description:

We manufacture and export a qualitative range of APFC panels (Contactor Switching), which are manufactured using best quality material. These panels are  power factor correcting system used for P.F. correction of loads with in short time. Easy to install, our range is available in both manual as well automatic functions. Further, we make sure that these are in strict adherence with set international standards.

Our APFC panels are designed using cutting edge technology. Our range is known for power quality improvement, safe usage and less maintenance cost. Quality tested on various measures, our panels are standard compliant and available at highly competitive prices.

The main features of our control panels are:

1.  Maintains high Power Factor constantly 
2.  High efficiency 
3.  In-built independent fuses/MCB''s/MCCB''s 
4.  Protection from excess power in the system. 
5.  Prevents leading Power Factor in low load conditions 
6.  Clearly marked buttons and indicators 
7.  Minimizes harmonic current 
8.  Easy to use 
9.  Corrosion-resistant 
10. Long lasting 
11. Electrical insulation 
12. Protects electrical equipments.
13. Capacitor Switching- Contactor/Thyristor.
14. Line Reactors (5.67%, 7%, 14%) for Harmonic filteration.
15. Auto/Manual Switching function.
16. Online Capacitor health Check fucntion.

Approx. Rs 5 Lakh / PieceGet Latest Price

We are offering EB Metering Panel to our clients.

It is to be installed EB Power Supply input point at the Resident or Site. The load has to be taken after the EB meter from this panel. Main EB Incomer compartment connected to the Bus bar and through Cut out, EB Metres and MCB are constructed.

Approx. Rs 3.5 Lakh / UnitGet Latest Price

Product Description:

• Lower KVA Demand of Inductive loads (which is a Major part of Industrial system)
• Lower Voltage Drops in Lines and Cables
• Electricity company will also benefit user by giving Rebate per KW per PF.
• Reduces KVA Demand of Inductive Loads
• I²R losses reduces results in economical selection of switchgear Components and Cable.

• SDE-23: In this Panel the Contractors Used for Controlling the capacitors are of AC-23 Duty for economical cost.
• SDE-26: In this Panel, Specially Capacitor Duty Contractor AC-6b are used for heavy duty power factor correction.

Additional Information:

Approx. Rs 6 Lakh / UnitGet Latest Price

Product Description:

• High PF results in better utilization in the capacities of generation, transmission and distribution system
• With improved PF, the installed generating capacity can enter to higher KW loading
• A high PF reduces the magnitude of total current drawn resulting in reduction of cable losses and transformer losses and effects a consequent reduction in the heating of components involved
• Improvement in PF will reduce voltage drop in cables
• By maintaining a good PF, the industry can avoid penalties levied by the Electricity Boards for drawing power at low PF
• For a given KW loading the KVA demand reduces with increase in PF
• So a high PF facilities demand management

Approx. Rs 1.25 Lakh / UnitGet Latest Price

Product Description:

• Performance of Active with cost effectiveness of passive
• Compliance with prescribed harmonic limits - No penalty
• Unity Power Factor - Higher savings
• Reduced energy (kVAh) charges - Higher savings

• Output Power: 1400w/1600w
• Output Current: 4.5amp minimum
• N+X parallel redundancy: max 3 unit 6-20kva